F1 Firearms Skeletonized AR15 Receiver Set

F1 Firearms Skeletonized AR15 Receiver Set

F1 Firearms Skeletonized AR15 Receiver Set BDR-15-3G

F1 Firearms Skeletonized AR15 Receiver Set is a modern take on the MIL-SPEC M16 of yester-year. This matched set was meticulously engineered to be as lightweight as physically possible, while remaining rigid and cosmetically pleasing to the eye. All areas not inherent to functionality have been stripped away, leaving a beautiful base for any AR-15 build. Each set is hand finished and matched in-house, for the utmost in operational and cosmetic perfection that AR shooters have come to expect from F-1 Firearms. The F-1 BDR-15-3G sets accept all MIL-SPEC patterned parts as well as Magpul PMAG magazines.

F1 Firearms Skeletonized AR15 Receiver Set BDR-15-3G

    • BDR-15-3G matched set
    • Manufactured from high grade 7075-T6 billet aluminum
    • Unnecessary surfaces milled out for lightest reliable configuration
    • Oversized trigger guard
    • Front and rear take down pins included and installed
    • Screws included for bolt catch, receiver tensioning, take-down pin detent and trigger adjustment
    • Black – Type III Class 2 hard anodizing
    • Colors – Type II hard anodizing
    • 60° beveled magwell
    • Produced solely in matched sets and hand finished for the utmost in quality and customer satisfaction
    • F-1 Firearms 100% Product Guarantee

F-1 Firearms’ Color Anodizing Disclaimer: We at F-1 Firearms and our 3rd party anodizing partner try our very best to ensure the highest in quality with regards to our color anodizing. However, our color anodizing is low end Type III (0.0002″ – 0.0012” in thickness) which can only be expected to withstand normal wear and tear and F-1 Firearms cannot be held liable for long term fatigue. The color anodizing process is not a 100% color match every time thus it is expected that their will be some slight color variations in the anodizing and F-1 Firearms cannot be held liable for said variations.


Century Arm RAS47 ak47

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVERBAD PDW MONOLITHIC LOWER RECEIVER integrates a monolithic adjustable PDW stock which is the result of a collaboration between BAD and Cross Machine Tool

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

VERT  PDW Lower – MODEL: BAD-PDW Monolithic PDW Lower Receiver + Stock System

  • Built-In PDW Stock System
  • Ultra Compact Design – 4.75″ Stock Length for Ultimate Concealment
  • Proprietary Ultra Compact Buffer & Recoil Spring System – Compatible with MilSpec M16/AR15 Bolt Carrier
  • Self-Contained Buffer System – No Proprietary Bolt Carrier Required!  Ability to “Shotgun” the Upper
  • Monolithic Engineering – Receiver and PDW Stock Housing Precision CNC From Single Block of Billet 7075-T6 Aircraft Grade Aluminum for Superior Strength and Lightweight Design
  • Continuous Cheek Weld for Ultimate Comfort and Stability/Accuracy
  • Billet CNC Milled 7075-T6 Aluminum Buttstock
  • Build-In, Integral QD Sling Point at  Buttstock
  • Heat Treat & Harden S7 Tool Steel .315″ Dia. Guide Rods for Ultimate Impact Strength and Durability
  • No Metal-To-Metal Contact between Guide Rods and Receiver Housing
  • New Industry Standard in Smooth Stock Operation with Linear Motion Guide Bushings
  • (4) Locking Stock Positions – Lockable in Both Direction.  From 4.75″ Fully Collapsed to 8.75″ Fully Extended (measured from rear of receiver to end of stock)
  • Dimpled Locking Stops with Stainless Steel Ball Bearing & S7 Tool Steel Locking Latch
  • Ambidextrous Bolt Release (hardware included)
  • Ambidextrous Magazine Release (hardware included)
  • MIL-A-8625F, Type III, Class 2, Hard Anodized Flat Black Finish
  • Compatible with TDP/Mil Standard AR Lower Receiver Parts (except for built-in proprietary components)
  • Pictograph Selector Markings Properly Marked for 90° Safety or  BAD-ASS-ST / BAD-CASS-SA-ST Short Throw Ambidextrous Safety Selectors
  • Receiver Safety Selector Hole & Internal Wall Machined with Relief Cut for Battle Arms Development “SHORT-THROW / REVERSIBLE” Ambidextrous Safety Selectors
  • Multi Caliber Marking for Build Versatility
  • Flared, Deep Beveled Magwell
  • Easy in Install Set Screw Bolt Catch Pin (Pin Included)
  • Captured Takedown Pin Detent Spring (Set Screw Included)
  • Upper/Lower Receiver Tension Screw (Screw included)
  • Integrated Trigger Guard
  • All Components, material, and packaging made in the USA

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System 2

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System 2

Additional Components Include:

  • BAD-CASS-SA-ST – Combat Ambidextrous Safety Selector – 50°/90° Reversible – Standard & Short Lever
  • BAD-ATG – Battle Arms Development Adjustable Tactical Grip – 3 Grips-In-One – 3 Different Angles
  • BAD-EMMR-L-B – Enhanced Modular Magazine Release – Large Finger Pad – Black (Large Finger Pad may be replaced by Medium Finger Pad Pending Inventory Levels)
  • BAD-EPS – Enhanced Pin Set (Enhanced Pivot Pin & Enhanced Takedown Pin)
  • BAD-EBC – Enhanced Bolt Catch – CNC from Billet Steel
  • MilSpec Magazine Release & Spring
  • Bolt Catch Detent & Spring
  • Buffer Detent & Spring

Not Included:

  • Trigger Group (Trigger, Hammer, Disconnector, Trigger Pin, Hammer Pin, Trigger Spring, Hammer Spring, Disconnector Spring)

WARNINGS:

  • Will not work with solid filled 9mm bolt carrier
  • VERT TM buffer system is designed for 5.56/.223 direct gas impingement system 
  • VERT TM buffer system can work with piston driven AR if the rear, internal dimensions of the bolt carrier is Mil-Spec
  • Use of FAIL ZERO NICKLE BORON Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized>
  • Inside, rear cavity of the bolt carrier must be .625″ diameter x .625″ deep minimum to clear the buffer.  Damage may occur if proper clearance isn’t met.

BAD PDW MONOLITHIC LOWER RECEIVER


Aero Precision Builder Set MultiCam Black

 

Aero Precision Builder Set MultiCam Black

Aero Precision Builder Set MultiCam Black

Due to high demand, we are offering backorders on this product and will be sending out an additional batch for coating.  Click here to order directly from Aero Precision.

Our August Monthly Builder Set is Multicam Black Hydrodip! This package deal features the finished pieces you need to assemble your own Multicam Black AR15 M4E1 Rifle, including an M4E1 Upper Receiver, Gen 2 Lower Receiver, 12″ KeyMod Handguard and Billet Trigger Guard all custom Multicam Black Hydrodip. Stand out at the range with a unique and eye catching build. This is a one time offer for this color – once they are gone, they are gone!

Includes:

  • M4E1 Enhanced Upper Receiver
  • AR15 Gen 2 Stripped Lower Receiver
  • 12″ KeyMod Handguard
  • Billet Trigger Guard
  • All 4 pieces are finished in Multicam Black Hydrodip

Hydrodip done by Joint Force Enterprises, an industry leader in custom firearms coatings.

 

Aero Precision Builder Set MultiCam Black

%d bloggers like this: