BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVERBAD PDW MONOLITHIC LOWER RECEIVER integrates a monolithic adjustable PDW stock which is the result of a collaboration between BAD and Cross Machine Tool

BAD PDW MONOLITHIC LOWER RECEIVER

BAD PDW MONOLITHIC LOWER RECEIVER

VERT  PDW Lower – MODEL: BAD-PDW Monolithic PDW Lower Receiver + Stock System

  • Built-In PDW Stock System
  • Ultra Compact Design – 4.75″ Stock Length for Ultimate Concealment
  • Proprietary Ultra Compact Buffer & Recoil Spring System – Compatible with MilSpec M16/AR15 Bolt Carrier
  • Self-Contained Buffer System – No Proprietary Bolt Carrier Required!  Ability to “Shotgun” the Upper
  • Monolithic Engineering – Receiver and PDW Stock Housing Precision CNC From Single Block of Billet 7075-T6 Aircraft Grade Aluminum for Superior Strength and Lightweight Design
  • Continuous Cheek Weld for Ultimate Comfort and Stability/Accuracy
  • Billet CNC Milled 7075-T6 Aluminum Buttstock
  • Build-In, Integral QD Sling Point at  Buttstock
  • Heat Treat & Harden S7 Tool Steel .315″ Dia. Guide Rods for Ultimate Impact Strength and Durability
  • No Metal-To-Metal Contact between Guide Rods and Receiver Housing
  • New Industry Standard in Smooth Stock Operation with Linear Motion Guide Bushings
  • (4) Locking Stock Positions – Lockable in Both Direction.  From 4.75″ Fully Collapsed to 8.75″ Fully Extended (measured from rear of receiver to end of stock)
  • Dimpled Locking Stops with Stainless Steel Ball Bearing & S7 Tool Steel Locking Latch
  • Ambidextrous Bolt Release (hardware included)
  • Ambidextrous Magazine Release (hardware included)
  • MIL-A-8625F, Type III, Class 2, Hard Anodized Flat Black Finish
  • Compatible with TDP/Mil Standard AR Lower Receiver Parts (except for built-in proprietary components)
  • Pictograph Selector Markings Properly Marked for 90° Safety or  BAD-ASS-ST / BAD-CASS-SA-ST Short Throw Ambidextrous Safety Selectors
  • Receiver Safety Selector Hole & Internal Wall Machined with Relief Cut for Battle Arms Development “SHORT-THROW / REVERSIBLE” Ambidextrous Safety Selectors
  • Multi Caliber Marking for Build Versatility
  • Flared, Deep Beveled Magwell
  • Easy in Install Set Screw Bolt Catch Pin (Pin Included)
  • Captured Takedown Pin Detent Spring (Set Screw Included)
  • Upper/Lower Receiver Tension Screw (Screw included)
  • Integrated Trigger Guard
  • All Components, material, and packaging made in the USA

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System 2

BAD-PDW Monolithic PDW Lower Receiver VERT Stock System 2

Additional Components Include:

  • BAD-CASS-SA-ST – Combat Ambidextrous Safety Selector – 50°/90° Reversible – Standard & Short Lever
  • BAD-ATG – Battle Arms Development Adjustable Tactical Grip – 3 Grips-In-One – 3 Different Angles
  • BAD-EMMR-L-B – Enhanced Modular Magazine Release – Large Finger Pad – Black (Large Finger Pad may be replaced by Medium Finger Pad Pending Inventory Levels)
  • BAD-EPS – Enhanced Pin Set (Enhanced Pivot Pin & Enhanced Takedown Pin)
  • BAD-EBC – Enhanced Bolt Catch – CNC from Billet Steel
  • MilSpec Magazine Release & Spring
  • Bolt Catch Detent & Spring
  • Buffer Detent & Spring

Not Included:

  • Trigger Group (Trigger, Hammer, Disconnector, Trigger Pin, Hammer Pin, Trigger Spring, Hammer Spring, Disconnector Spring)

WARNINGS:

  • Will not work with solid filled 9mm bolt carrier
  • VERT TM buffer system is designed for 5.56/.223 direct gas impingement system 
  • VERT TM buffer system can work with piston driven AR if the rear, internal dimensions of the bolt carrier is Mil-Spec
  • Use of FAIL ZERO NICKLE BORON Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized>
  • Inside, rear cavity of the bolt carrier must be .625″ diameter x .625″ deep minimum to clear the buffer.  Damage may occur if proper clearance isn’t met.

BAD PDW MONOLITHIC LOWER RECEIVER


UBR 2 0 COLLAPSIBLE AR15 STOCK | Magpul UBR

UBR 2 0 COLLAPSIBLE AR15 STOCK | Magpul UBR

MAGPUL UBR 2.0 COLLAPSIBLE AR15 STOCK

MAGPUL UBR 2.0 COLLAPSIBLE AR15 STOCK

MAGPUL UBR 2.0 COLLAPSIBLE AR15 STOCK

MAGPUL UBR 2.0 COLLAPSIBLE AR15 STOCK : is an adjustable stock for the AR15, M-16, AR-15, M4 designed to offer the same strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position. An update of the revolutionary Utility/Battle Rifle (UBR) stock, the MAGPUL UBR 2 features a fixed cheek piece to provide a consistent cheek weld in any of its 8 positions, and is compatible with A5-length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the MAGPUL UBR 2 comes standard with front and rear QD sling attachment points, a recessed footman’s loop, the ergonomic MOE SL angled-toe rubber butt-pad, and storage compartment. Buffer tube included, compatible with A5- length springs and buffers as well as carbine springs and buffers (with included spacer).

MAGPUL UBR 2.0 COLLAPSIBLE AR15 STOCK is an adjustable stock for the AR15, M-16, AR-15, M4, designed to offer the same strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position.

An update of the revolutionary MAGPUL Utility/Battle Rifle (UBR) stock, the MAGPUL UBR 2 features a fixed cheek piece to provide a consistent cheek weld in any of its 9 positions, and is compatible with Carbine as well as A5-length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the MAGPUL UBR 2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman’s loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment. Made in U.S.A.

MAGPUL UBR 2.0 COLLAPSIBLE AR15 STOCK FEATURES

  • Mounts on a durable custom Receiver Extension tube (included) to accommodate the common M4 carbine buffer and spring as well as aftermarket A5 buffer systems*
  • Solid “fixed stock” lockup and consistent cheek weld in all positions
  • 9-Position LOP adjustability
  • Adjustment lever requires only gross motor movement to operate yet the entire stock remains streamlined and anti-snag
  • Enhanced lock mechanism with dual locking pawls for maximum drop strength and shock resistance
  • Multi-shell construction provides solid foundation and shields critical operating parts from penetration damage
  • Sloping cheek weld combines a slim profile with user comfort
  • Storage Compartment in tail of stock is removable and the door is reversible for user preference
  • Rubber butt-pad offers an anti-slip surface and increases impact protection
  • Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
  • Sling Mounts
    • Front – QD swivel mount for ambidextrous one-point QD sling mounting
    • Left/Right Rear – Rotation-limited QD swivel sling mounts fit up to 1.5″ push-button swivels
    • Bottom – 1.25″ sling loop (additional loop accessible when Storage Compartment is removed)

MAGPUL UBR 2.0 COLLAPSIBLE AR15 STOCK SPECIFICATIONS

  • Weight, w/Receiver Extension: 21.3 oz.
  • Length: 8.5-12.5 in.
  • Width, max: 1.7 in.
  • LOP Adjustment Range: 4.0 in.
  • LOP, M4 Collapsed: ~11.6 in.
  • LOP, M4 Extended: ~15.6 in.

 

The MAGPUL UBR 2 includes the required custom Receiver Extension tube, Buffer Spacer, and all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer and spring are required for use with the UBR and are not included.

AXTS RAPTOR

AXTS RAPTOR


AR15 Gunners Mount Present Arms

Present Arms AR15 Gunners Mount

Present Arms AR15 Gunners Mount

Present Arms AR15 Gunners Mount – (follow the link to the left and watch Brownells video) Gunners Mount, Platform with receivers and pockets for rifle, carbine, and pistol repairs.  The ideal platform to work AR15 M4 M-16 lowers.  Assemble, disassemble, and repair.  Parts pockets are cut to prevent runaway components and a slot for supporting magazines when making repairs.  The platform will also accommodate pistol magazine posts and other magazine fed weapon systems.

View a PDF of the Present Arms AR15 Gunners Mount

Strategically cut for:

  • Magazines re-work AR15 charging handle for latch change outs
  • Brownells® AR15 Front Sight Bench Block
  • Present Arms AR15 Upper Mount and AR Lower Mount
  • Present Arms AR15 Receiver Tube alignment block

Upper Repair Fixture Mount, with supports for dust cover and bolt assist removal – The Upper mount is machined from synthetic, non-marring polymer, giving added support both inside and out for distribution of loading as a result of repairs. Ball de-tent pins are provided to securely hold the upper by way of for and aft takedown points. Vertical pins are installed to hold the dust cover in a horizontal position for ease in assembly and disassembly of ejection port parts. Machine cut to allow HK416 dust cover vertical pin and fwd assist retention pin free fall from assemble into parts pocket. Our Patent Pending Upper mount securely holds the upper for optics, forward assist and dust cover repairs.

AR15 Lower Repair Fixture Mount, enables lower receiver to be inverted and worked on the same mount– AR Lower Repair Fixture Mount is machined from synthetic non-marring polymer providing added support inside and out of the lower receiver. Securely held when pinned with the takedown and pivot pins of the receiver. The receiver can be mounted in both upright and inverted position for full access when assembling and disassembling . Use with our Patent Pending Receiver Alignment Block. Ensuring correct 12-6 alignment of the receiver extension tube . Ensure correct stock alignment. The perfect platform and mount for the armorer.

AR15 Magazine Post w/pins for Gunners Mount- The MP-AR-1 firmly holds your AR-15 in the center of our Gunners Mount Plus. This mount gives you a solid base for working on your AR-15. Made of a tough polymer it will not mar or scratch your firearm.

Riser Block Assembly- 2 inches tall

Receiver Extension Alignment Block- Aligns receiver extension at the 12 O’clock position when tightening down the receiver extension nut.

Present Arms AR15 Gunners Mount

Present Arms AR15 Gunners Mount (Click for High Resolution Image)

 

Present Arms AR15 Gunners Mount

Present Arms AR15 Gunners Mount

 

Present Arms AR15 Gunners Mount

Present Arms AR15 Gunners Mount

The Gunner’s Mount is the base platform of our Patent Pending family of firearm workstations.  Our systems are tool-less, ergonomically designed and cost effective, complete with AR15 Magazine post and large swivel.  Ideal for building AR’s or servicing your rifle.

The Upper Receiver Block – URB gives added support both inside and out. Ball de­‐tent pins are provided to securely hold the upper by way of fore and aft takedown points. Vertical pins installed to hold the dust cover in a horizontal position for ease in assembly and disassembly. Machine cut to allow HK416 dust cover vertical pin and fwd assist retention pin

The Lower Receiver Block – LRB securely holds receiver with takedown and pivot pins. Receiver can be mounted in both upright and inverted position for full access when assembling and disassembling. Use with our Receiver Alignment Block. Ensuring correct 12‐6 alignment of the receiver extension tube. Ensure correct stock alignment. The perfect platform and mount for the armorer.

The Receiver Alignment Block – RAB is cut to the profile of the receiver extension tube.  With the Lower Receiver securely fitted to the Lower Receiver Repair Block (AR15LRB) the receiver extension is held securely in a true 12-­6  position when taking up on the castle nut.

Trigger Roll Pin Gunner’s Puck – The GP‐Trigger securely holds the lower receiver offering full support to the lower trigger guard lips when removing or installing the roll pin. The GP‐Trigger guides off the pistol grip.  The lips are the weakest item on the receiver and can easily be snapped or fractured damaging the lower receiver.

Present Arms AR15 Gunners Mount


TIMNEY AR15 Targa 2 STAGE TRIGGER LONG

 TIMNEY AR15 Targa 2 STAGE TRIGGER

TIMNEY AR15 Targa 2 STAGE TRIGGER

The new  TIMNEY AR15 Targa 2 STAGE TRIGGER with a LONG first stage take-up is a self-contained, 100 percent drop-in AR15 trigger unit that is ready to install in your AR15 for an exceptionally smooth, crisp, two-stage trigger pull. No gunsmithing, no fitting or adjusting required.The pull weight is factory calibrated for a two-pound first stage and a two-pound second stage. The trigger housing is constructed of military grade, 6061 T6 alloy that is CNC machined using state-of-the-art robotics and is anodized for superior durability. The hammer is wire EDM cut from S7 tool steel, combining hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking and is Teflon-nickel coated for lubricity. Other components are wire EDM cut from A2 tool steel, then heat treated to Rockwell 58 for long lasting, dependable service life.

The  TIMNEY AR15 Targa 2 STAGE TRIGGER installs using your rifle’s original hammer/trigger pins – our proprietary design eliminates pin rotation and walkout.

Timney Triggers is dedicated to ensuring our customers a lifetime of hassle free shooting enjoyment.  That is evident in the last step of the manufacturing process, when each trigger is hand assembled, tested, and calibrated for the specific rifle model it is intended for before it’s delivered to the customer’s door.  Timney Triggers is proud to offer a lifetime warranty on all of their products and each trigger is proudly Made in the USA

Timney Trigger Installation Instructions

TIMNEY AR15 Targa 2 STAGE TRIGGER LONG


VORTEX SPARC AR SCOPE

VORTEX SPARC AR SCOPE

VORTEX SPARC AR SCOPE

VORTEX SPARC AR SCOPE – Simple—Fast—Effective—Point and Shoot. When you boil it down, those are the advantages of a red dot sight. And that’s what the SPARC AR delivers – all in a durable, lightweight, compact, and ultra-clean package. Digital rear-facing controls for power and dot brightness offer quick access and are viewable from the shooting position. 2 MOA dot diameter promotes precise point of aim. Automatically returns to last dot intensity used when powered up. Unlimited eye relief and parallax free, the SPARC AR gets shooters on target fast. Waterproof, fogproof and shockproof for ultimate durability. Unit automatically shuts off after 12 hours to prevent accidental battery rundown and operates using a common AAA battery. Duty rifle – home defense—recreation, the SPARC AR is built to handle all your red dot needs. PRE-ORDER VORTEX SPARK AR SCOPE

VORTEX SPARC AR INSTRUCTION MANUAL

VORTEX SPARC AR SCOPE RETICLE

VORTEX SPARC AR SCOPE RETICLE

VORTEX SPARC AR SCOPE OPTICAL FEATURES

  • Fully Multi-Coated Multiple anti-reflective coatings on all air-to-glass surfaces increase light transmission.
  • Bright Red Dot Display is highly visible in daylight.
  • Brightness Settings Provides 10 variable illumination settings—the lowest two settings are night-vision compatible.
  • Construction Features Nitrogen Gas Nitrogen gas purging with o-rings-seals delivers fogproof, waterproof performance.
  • Single-Piece Chassis Compact and lightweight.
  • Waterproof O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
  • Shockproof Rugged construction withstands recoil and impact.
  • Hard Anodized Finish Highly durable low-glare matte finish.
  • Operating Temperature Rated from -4 degrees to +158 degrees Fahrenheit.

VORTEX SPARC AR SCOPE CONVENIENCE FEATURES

  • Multi-Height Mount System Includes a spacer shim that can be utilized to provide two different mounting heights: lower 1/3 co-witness (40 mm) & absolute co-witness (37 mm).
  • Unlimited Eye Relief Non-critical eye relief for rapid target acquisition.
  • Battery Life 12-hour auto-shutdown feature maximizes battery life. Typical battery life is 300 hours at maximum brightness and 5,000 hours at minimum brightness setting.

VORTEX SPARC AR SCOPE SPECIFICATIONS

  • Magnification 1 x
  • Objective Lens Diameter 22 mm
  • Eye Relief Unlimited
  • Adjustment Graduation 1 MOA
  • Max Elevation Adjustment 90 MOA
  • Max Windage Adjustment 90 MOA
  • Parallax Setting Parallax Free
  • Length 2.9 inches
  • Weight 7.5 oz

VORTEX SPARC AR VERSUS VORTEX SPARC II

SPARC AR – runs on easily accessible AAA batteries int he integrated base and features a very snag-free design with ramped features that keep any knobs or dials from catching on things during operation.

SPARC II – The advantage here is that the SPARC II does not have an integrated base, SPARC AR is shorter and uses a sleeve/lens cover system for lens protection which is more of a personal preference item.

Other than those differences, the two are very similar internally and extremely rugged and durable.

VORTEX SPARK AR VERSUS VORTEX SPITFIRE

The SPARC AR is a standard red dot sight that can be co-witnessed with iron sights and used in conjunction with a magnifier. The Spitfire 1x is a prismatic sight that cannot be co-witnessed or used with a magnifier, but it has an etched reticle as opposed to a reflex red dot. The etched reticle means you never lose a point of aim even if the batteries die, and you don’t have to worry about a starburst effect that is had with red dots when the user has an astigmatism.

VORTEX SPARC AR SCOPE


%d bloggers like this: